This range of capacitor is specially designed for series and parallel power factor correction of flourescent lamps. They are constructed with self healing metallised polypropylene dielectric. An attractive feature is the Quick Fit addition to the moulded case.

CBB80 is lamp capacitor or lighting capacitor (also called capacitor for lamp or capacitor for lighting), and is ideally energy-saving. CBB80 is non-inductively wound with metallized polypropylene film as the dielectric / electrode with encapsulated in a plastic/aluminium case sealed with epoxy resin.

Features of CBB80 Lamp Capacitors (Lighting Capacitors)

Box type provides the identical outer appearance;
Very low loss at high frequency, suitable for high current;
High insulation resistance, long life due to self-healing effect;
Especially safety reliability;
With explosion-proof structure;
Very small dissipation factor, small inherent temperature rise;
Applied to discharge lamp circuit operating, such as fluorescent lamps, halogen lamps, sodium lamps, fluorescent lamps, led street lighting, led floodlight, energy saving lamps, led flashlight.
Improve the line power and setup the pressure to start and so on. Inner with the device of Insurance flame-proof and discharging resistance.
It has the character of endure the high temperature.It can using in 40 degree to 85 degree.
Specification of CBB80 Lamp Capacitor (Lighting Capacitor)

Reference Standard
 IEC 1048, EN61048 EN61049
Climatic Category 40/85/21 or 40/105/21
Rated Voltage 250VAC
Capacitance Range 2-50uf
Capacitance Tolerance ±5%
Voltage Proof Between Terminals 2.0Un(2S)
Terminals to Case 2000VAC
Dissipation Factor ≤0.2%(20℃, 1KHz)
Discharge Performance Less than 50V after breakage in 60 seconds at Un.
Voltage under Steady State Running under 1.1Un for long-period
Current under Steady State
 Running under 1.5Un for long-period.

1. Plastic Case Lighting Capacitor

2. Aluminum Can Lighting Capacitors